Technical Details for Stainless SS, Metal MS, Carbon CS, Alloy 20, High Nickel & Duplex Steel Plates, Coils, Pipes, Flanges & Pipe Fittings, Perforated Sheets, Chequered Plates, Boiler Plates, Corrugated Sheet, Rods, Angles, Forge Fittings, Flats Bar, Strips, Tubes, Wire Mesh, Nut Bolt & Fasteners, Wire Net, Camlock Coupling

Stainless Steel

Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu/ Others
301	0.15	2.00	0.045	0.030	1.00	16.00 – 18.00	6.00 – 8.00	-	0.10	-
304	0.08	2.00	0.045	0.030	0.75	18.00 – 20.00	8.00- 10.50	-	0.10	-
304L	0.030	2.00	0.045	0.030	0.75	18.00 – 20.00	8.00- 12.00	-	0.10	-
310S	0.08	2.00	0.045	0.030	1.50	24.00- 26.00	19.00 – 22.00	-	-	-
316	0.08	2.00	0.045	0.030	0.75	16.00 – 18.00	10.00 – 14.00	2.00 – 3.00	0.10	-
316L	0.030	2.00	0.045	0.030	0.75	16.00 – 18.00	10.00 – 14.00	2.00 – 3.00	0.10	-
317	0.08	2.00	0.045	0.030	0.75	18.00 – 20.00	11.00 – 14.00	3.00 – 4.00	0.10	-
317L	0.030	2.00	0.045	0.030	0.75	18.00 – 20.00	11.00 – 15.00	3.00 – 4.00	0.10	-
321	0.08	2.00	0.045	0.030	0.75	17.00 – 19.00	9.00 – 12.00	-	0.10	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2.00	0.045	0.030	0.75	17.00 – 19.00	9.00 – 13.00	-	-	Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1.00	0.040	0.010	1.00	10.50 – 11.75	0.50	-	-	Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.81.2	0.030	0.030	0.40.75	11.00- 12.00	1.5 max.	-	-	Ti= 6x (C) Min or 0.70 Max
410S	0.08	1.00	0.040	0.030	1.00	11.50- 13.50	0.60	-	-	-
410	0.15	1.00	0.040	0.030	1.00	11.50- 13.50	0.75	-	-	-
420	0.35	0.50	0.035	0.015	0.50	12.00 – 13.00	0.20.3	-	-	-
430	0.12	1.00	0.040	0.030	1.00	16.00 – 18.00	0.75	-	-	-
JSL AUS	0.08	7.08.0	0.070	0.030	0.75	15.50 – 16.50	4.25 – 4.75	-	-	0.9 – 1.10
JS- 203	0.08	9.2510.25	0.070	0.030	0.75	14.25 – 15.25	2.25 – 2.75	-	-	1.60- 2.0
301M	0.10	4.55.5	0.060	0.030	0.75	14.50 – 15.50	6.0 – 7.0	-	-	1.70- 1.90
* Thickness of 1.27mm & below will have elongation of 20% min.